Maxim-integrated 73M1866B/73M1966B FXOCTL Application Manuel d'utilisateur télécharger pdf (Page 13)

UG_1x66B_009 73M1866B/73M1966B FXOCTL Application User Guide

Rev. 4.1 13

2.7.2 On-Hook Command

The onhook command brings the FXO channel on-hook.

Syntax

FXOCTL:NN> onhook (Bring current channel ID off-hook)

FXOCTL:NN> onhook <XX> (Bring channel XX off-hook)

Where: XX Channel ID.

NN Show the current active channel ID.

The following is a log of commands that bring the current channel ID and channel 4 on-hook.

Figure 11: On-Hook Command Logging Session

2.8 FXO Line Status and Monitor

The FXO line’s current and voltage can be autonomously monitored by setting the desired level of the IET

(Interval Event Table). The FXOCTL provides commands for managing the IET and controlling the

monitoring process.

FXOCTL:00> onhook

Channel 0 is ON-hook.

FXOCTL:00>

FXOCTL:00> onhook 4

Channel 4 is ON-hook.

Take current channel (0) on-hook.

Take channel 4 on-hook.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Pas de commentaire

Maxim-integrated 73M1866B/73M1966B FXOCTL Application Manuel d'utilisateur Page 13