Maxim-integrated Teridian V.22 bis Linux Softmodem for 73M1822/73M1 Manuel d'utilisateur télécharger pdf (Page 19)

UG_1x22_043 V.22 bis Linux Softmodem for 73M1x22 MicroDAA User Guide

Rev. 1.5 19

@L[n] Set Lease Line Operation

Lease line operation is designated by S89 bit 2

n = 1 Sets lease line bit

n = 0 Clears lease line bit

@Z Escape to OS

Terminates the softmodem application gracefully and goes to Linux prompt.

To return to Softmodem application from the linux prompt, type “tsc_1922_CRLF” from the

root directory.

+++ Escape Sequence

During a data connection, the escape command (+++) returns you to Command state

without

terminating the data connection so you can enter AT commands. The TSC

Softmodem supports the TIES (Timing Independent Escape Sequence) escape, not the

patented Hayes escape. The +++ must be followed by a valid AT command for the escape

to be recognized. If a non-

AT command follows the +++, the modem will return to the data

mode. Giving the TSC Softmodem a “+++AT” is also valid for escaping to the on-

line

command state.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 68 69

Pas de commentaire

Maxim-integrated Teridian V.22 bis Linux Softmodem for 73M1822/73M1 Manuel d'utilisateur Page 19