Maxim-integrated 73M1822/73M1922 Modem CTL Application Manuel d'utilisateur télécharger pdf (Page 12)

73M1822/73M1922 Modem CTL Application User Guide UG_1x22_056

12 Rev. 1.0

2.6 Exit Command

The exit command terminates the Modem CTL program. When issued, the user is prompted and asked

to confirm with a Y(es) or N(o). A “yes” terminates the program.

Syntax

1X22CTL:NN> exit

Where: NN Shows the current active channel ID.

The following is a log of the command to exit the Modem CTL program.

Figure 9: Exit Command Logging Session

2.7 Hook Switch Operation

The Modem CTL provides commands to manually control the hook switch operation of the FXO channel.

The FXO channel can be switched off hook or on hook.

2.7.1 Off-Hook Command

The offhook command brings the FXO channel off-hook.

Syntax

1X22CTL:NN> offhook (Current channel ID off-hook)

1X22CTL:NN> offhook XX (Channel ID XX off-hook)

Where: NN Shows the current active channel ID.

The following is a log of commands that bring the current channel ID and channel 4 off-hook.

Figure 10: Off-Hook Command Logging Session

Modem CTL:00> exit

Are you sure you want to quit? (Y or N)y

Good bye!

Modem CTL:00> offhook

Channel 0 is OFF-hook.

Modem CTL:00>

Modem CTL:00> offhook 4

Channel 4 is OFF-hook

Enter “Y” to confirm.

Take current channel (0) off-hook.

Take channel 4 off-hook.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Pas de commentaire

Maxim-integrated 73M1822/73M1922 Modem CTL Application Manuel d'utilisateur Page 12