Maxim-integrated 73M1822/73M1922 Modem CTL Application Manuel d'utilisateur télécharger pdf (Page 13)

UG_1x22_056 73M1822/73M1922 Modem CTL Application User Guide

Rev. 1.0 13

2.7.2 On-Hook Command

The onhook command brings the FXO channel on-hook.

Syntax

1X22CTL:NN> onhook (Bring current channel ID off-hook)

1X22CTL:NN> onhook <XX> (Bring channel XX off-hook)

Where: XX Channel ID.

NN Show the current active channel ID.

The following is a log of commands that bring the current channel ID and channel 4 on-hook.

Figure 11: On-Hook Command Logging Session

2.8 Line Status and Monitor

The line’s current and voltage can be autonomously monitored by setting the desired level of the IET

(Interval Event Table). The Modem CTL provides commands for managing the IET and controlling the

monitoring process.

Modem CTL:00> onhook

Channel 0 is ON-hook.

Modem CTL:00>

Modem CTL:00> onhook 4

Channel 4 is ON-hook.

Take current channel (0) on-hook.

Take channel 4 on-hook.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Pas de commentaire

Maxim-integrated 73M1822/73M1922 Modem CTL Application Manuel d'utilisateur Page 13