Maxim-integrated DS4830A Optical Microcontroller Manuel d'utilisateur télécharger pdf (Page 144)

DS4830A User’s Guide

144

interrupt if enabled. When the match occurs, the timer reloads the GTV register with 0x0000 at the next timer clock.

In compare mode, the GTC register should be written first before setting the GTR bit.

16.1.2 – Clock Selection

There are three timer clock sources available in each timer module, core clock, peripheral clock and external clock.

The peripheral clock is twice the core clock. The external clock can be between 20MHz to 133MHz. The timer clock

source can be selected using CLK_SEL [1:0] bits in the GTCN register.

16.1.3 – Timer Clock Prescaler

Each timer has 6 different prescalers. The prescaler is selected by appropriately setting the GTPS [2:0] bits in the

GTCN register. The prescaler divides the selected input clock by a value from 1 to 1024.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 239 240

Pas de commentaire

Maxim-integrated DS4830A Optical Microcontroller Manuel d'utilisateur Page 144